| Osa Ei | Valmistaja | Hakemus |
|---|
| MX674ASD | MaximIC | Industry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1. TEMPCO(ppm/C) 50. |
| MAX4603CAE | MaximIC | Low on-resistance (2.5om max), quad, SPST, CMOS analog switches (two NO and two NC switches). |
| MAX6503CMN005-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) -5. |
| MX7537LP | MaximIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-1 LSB. |
| MAX388CWG | MaximIC | High-voltage, fault-protected analog multiplexer. 8-channel single-ended. |
| MAX6305UK00D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, 2 additional undervoltage reset inputs). Nominal timeout period 1ms. |
| MAX6321HPUK38DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6320PUK45BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| DS1858E-050 | MaximIC | Dual, temperature-controlled resistors with three monitors, 50KOhm |
| MAX6320PUK48DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| DG413DK | MaximIC | Improved, quad, SPST analog switches |
| MAX501BMRG | MaximIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4. |
| MAX501AENG | MaximIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-1/2. |
| MAX6309UK50D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.875(min),5.125(max) Nominal timeout period 20ms. |
| MAX306EQI | MaximIC | Precision, 16-channel, high-performance, CMOS analog multiplexer |
| MAX4074BLESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 60V/V, noninverting gain 61V/V, -3dB BW 66kHZ. |
| MAX430CPA | MaximIC | +-15V Chopper-stabilized operational amplifier. |
| MAX111ACWE | MaximIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX301EPE | MaximIC | Precision, dual, high-speed analog switch. |
| MAX4515CUK | MaximIC | Low-voltage, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC), +2V to +12V single-supply operation. |
| MAX653C/D | MaximIC | 3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX6318LHUK31BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 20ms, typ watchdog timeout 102ms |
| MX674AKN | MaximIC | Industry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 27. |
| MAX6316MUK49BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX3189EUT-T | MaximIC | 1Mbps, 1microA RS-232 transmitter. |
| MAX166AMJP | MaximIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1/2 LSB. |
| MAX4173HEUT-T | MaximIC | Low-cost,voltage-output, high-side current-sense amplifier. Gain 100V/V. |
| MAX6318LHUK46AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1ms,typ watchdog timeout 25.6sec |
| ICL7652CPD | MaximIC | Chopper-stabilized operational amplifier |
| MAX294C/D | MaximIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 25kHz |
