| Osa Ei | Valmistaja | Hakemus |
|---|
| AT49BV1604T-90UI | Atmel | 16-Megabit(1M x 16 or 2M x 8) 3-volt only flash memory, 25mA active, 0.01mA standby |
| AT27C512R-15JC | Atmel | 512K (64K x 8) OTP CMOS EPROM |
| AT27C010L-45TI | Atmel | 1Megabit(128K x 8) OTP CMOS EPROM,25mA max |
| AT27LV256A-90RI | Atmel | 256K(32K x 8) low voltage OTP CMOS EPROM |
| AT25320N-10SC-1.8 | Atmel | SPI serial EEPROM, 32K (4096 x 8), 500kHz, 1.8V to 3.6V |
| AT93C56W-10SI | Atmel | 3-wire serial EEPROM, 2000KHz, 4.5V to 5.5V |
| ATMEGA161-8PI | Atmel | Microcontroller with 16K bytes in-system programmable flash, power supply 4.0 - 5.5V, 8 MHz |
| AT27C040-12JI | Atmel | 4-Megabit (512K x 8)OTP EPROM |
| T89C51RD2-SLFC-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT28C64X-25TC | Atmel | 64K(8K x 8) CMOS EPROM |
| AT27C256R-90TI | Atmel | 256K (128K x 8) OTP CMOS EPROM |
| AT49F002N-90JI | Atmel | 2-Megabit (256K x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT93C66-10SC-2.7 | Atmel | 3-wire serial EEPROM, 10ms, 2.7V to 5.5V |
| AT93C57-10SI | Atmel | 3-wire serial EEPROM 2K(256 x 8 or 128 x 16) |
| AT25HP256-10PI | Atmel | SPI serial EEPROM 256K(32,768 x 8), fmax 10000 kHz, twc(max) 5ms |
| AT49BV001N-12JC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 2.7V to 3.6V |
| AT49LV001-70PC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 3.0V to 3.6V |
| AT24CS256-10PI-1.8 | Atmel | 2-wire serial EEPROM with permanent software write protect 256K(32,768 x 8), 100kHz,twr(max) 20ms |
| AT49F040-90JC | Atmel | 4 Megabit (512K x 8) 5-volt only CMOS flash memory |
| AT90S8515-4JC | Atmel | 8-bit microcontroller with 8K bytes in-system programmable flash, 2.7 - 6.0V, 4 MHz |
| AT49LV040T-15TI | Atmel | 2-Megabit (512K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT17C256-10PI | Atmel | FPGA configuration EEPROM, 5V-devices |
| AT29C020-12JI | Atmel | 2-Megabit (256K x 8) 5-volt only CMOS flash memory |
| AT49LV080-12CC | Atmel | 8-Megabit (1M x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| ATF1504AS-15JI68 | Atmel | High-performance EE CPLD, 100 MHz |
| AT28C64B-20JC | Atmel | 64K(8K x 8) CMOS EEPROM with page write and software data protection |
| AT49HF010-55TI | Atmel | 1-Megabit (128K x 8) 5-volt only CMOS flash memory, 55ns |
| AT27BV800-12RI | Atmel | 8-Megabit (512K x 16 or 1024K x 8) unregulated Battery-Volotage high speed OTP EPROM 10mA active, 0.02mA standby |
| AT6010LV-4JC | Atmel | Coprocessor field programmable gate arrays, 3.3V |
| AT49F4096-90TI | Atmel | 4-Megabit (256K x 16) 5-volt only CMOS flash memory,50mA active current,0.3mA standby current |
